Zundapp Bella, Rear shocker conversion kit, MB


Modernise your Zundapp Bella on the rear suspension by fitting 2 adjustable shockers.

This is a complete home kit includes

  • A pair of adjustable chrome shockers
  • 4 x MB weld on brackets for the frame
  • High tensile 10mm bolts, nuts and washers
  • 2 steel sleeves

This kit can also be used on motorcycle engine transplant conversions on other scooters.

See tips on how to do the conversion.

£ 116.98
Price: £ 97.48 Ex Vat

Further Information required

Contact Shop


This can be done to a complete running bike or just the frame.

It's easy to do it on a complete running bike or one been stripped down, so best do this first to make sure every thing is true.

Remove the top section to expose the original rear springs and shocker.

Remove the petrol tank and rear mudguard.

Remove the rear shocker springs and rear damper.

This conversion requires the mounts for the rear shocker and springs to be cut off using an angle grinder and cutting disc. Clean up with a flap wheel.

This will require the scooter to be turned over on it's sides.

The new shockers can be bolted into the original lower spring mounts, this centralises the shockers.

Then at the top where the original spring bracket was, you can fit 2 brackets either side of the new shocker, the brackets will fit nice and neat of each side of the frame. Then weld the brackets in position. 

The 2 steel sleeves fit in the lower shocker hole.

Reviews ( 1 )


5 star 1. Dan S 04 May 2017 

Fitted these, transformed the handling, would recommend to all Bella owners.

want to offer a review?
Click here

Questions? ( 1 )

Do you have a Question?

If you would like to ask us a question about this product, please feel free to click here to ask a Question Now!

Simon p on 14 Oct 2017 asked "Hi Mark I was wondering about carrying out this conversion on my Maicoletta , what are the measurements from eyelet to eyelet of the damper? Also the max diameter of the spring as it’s a bit tight under the body panel . Thanks "

MB Scooters Ltd replied: Center of eye to center of eye = 282mm. Diameter is 50mm

If you feel something is not correct with this product description or image then please contact us using the same link